At KNKT, we provide lifting and rigging solutions with logo for importers, distributors and lifting companies who want more than standard slings.
KNKT (Connect-KNKT) supplies lifting sling, ratchet strap, mooring rope, steel wire rope, marine equipment, material handling products, rigging hardware, elevator link and construction machinery items. From a manufacturer’s point of view, this article shows what you can customise, how the process works, and what you should prepare before you order.
Table of Contents
- What Are Custom Lifting Slings and OEM Rigging Products?
- What You Can Customise Across the KNKT Product Range
- Branding Options: Where and How to Add Your Logo
- Step by Step Customisation Process
- Information Buyers Should Prepare
- MOQ, Lead Time and Cost Factors
- Safety, Standards and Quality Control
- Why Work With KNKT for Custom Lifting Slings and Rigging Products
- How to Start Your Custom Project
1. What Are Custom Lifting Slings and OEM Rigging Products?
Custom lifting slings follow your own specification instead of a standard catalogue size. You define length, capacity, safety factor, colour, label content and sometimes packaging as well. When KNKT prints your logo and company details on the sling and packaging, the product becomes an OEM or private-label item under your brand.
Because KNKT also works with ratchet straps, mooring ropes, steel wire ropes, marine equipment, material handling products, rigging hardware, elevator link assemblies and construction machinery accessories, one project can use a complete branded set, not only the textile slings. As a result, your customers see a consistent product range from the hook to the pallet truck.
You usually need custom lifting slings when you want special dimensions, when several sites must follow one standard, or when you want your logo to appear on every lifting point in the supply chain.
2. What You Can Customise Across the KNKT Product Range
These lifting and rigging solutions with logo can cover webbing slings, ratchet straps, mooring ropes and other rigging products in the KNKT range.The table below gives a quick overview of the main custom options for KNKT products, with custom lifting slings as the core.
2.1 Customisation overview
| Product group | Typical custom options |
|---|---|
| Lifting sling | Type, WLL, safety factor, length, width, colour, label, packaging |
| Ratchet strap | Webbing width, length, lashing capacity, hooks, ratchet type, colour |
| Mooring rope | Diameter, length, material, colour, eyes or thimbles, reel or coil packing |
| Steel wire rope | Diameter, construction, coating, cut length, pressed fittings |
| Marine equipment | Dimensions, working load, surface treatment, connection details |
| Material handling | Fork size, wheels, handle style, paint colour, rating labels |
| Rigging hardware | Size, grade, surface finish, markings, small-box or bulk packaging |
| Elevator link | Link length, grade, end fittings, connection points |
| Construction machinery | Model options, attachments, colour, decals and safety plates |
This flexibility lets you build one unified range, with custom lifting slings at the centre and matching accessories around them.
2.2 Custom lifting slings
For textile slings, KNKT can adjust several key elements.
- Sling type: flat webbing sling with eyes, endless webbing sling or round sling for flexible lifting.
- Working load limit and safety factor: values that match your loads and the rules in your market.
- Dimensions: effective working length based on lifting height and rigging angle, plus webbing width that fits the WLL and contact area on the load.
- Colour and identification: standard WLL colours where required, or special colours for project zones, departments or brand recognition.
KNKT can also assemble custom lifting slings into multi-leg sets with master links and hooks, so you receive complete lifting assemblies ready for use.
2.3 Ratchet straps and mooring ropes
Many customers who order custom lifting slings also need matching cargo securing products.
- For ratchet straps, you choose webbing width and length, lashing capacity, hook style, ratchet style and colour.
- For mooring ropes, you select rope diameter, length, fibre type, eye splices or thimbles, and the preferred colour and packing.
In this way, your lifting and securing products follow the same logic and brand image.
2.4 Steel wire rope, rigging hardware and elevator link
Steel wire ropes, rigging hardware and elevator links support many lifting and marine applications.
- Steel wire rope can follow your choice of diameter, construction, coating and length, with pressed fittings such as thimbles or sockets.
- Rigging hardware, including shackles, hooks, rings and turnbuckles, can match the WLL and safety level of your custom lifting slings.
- Elevator links can be built to specific lengths and grades for hoists or maintenance work.
2.5 Material handling, marine equipment and construction machinery
Finally, KNKT can align material handling products, marine equipment and construction machinery accessories with the same colours, labels and decals. Your pallet trucks, stackers, winches or spreader bars can therefore carry the same identity as your custom lifting slings.
3. Branding Options: Where and How to Add Your Logo
After you fix the technical details, you can decide how your logo appears on custom lifting slings and the rest of the range. Good branding helps buyers and operators recognise your products at once.When you design lifting and rigging solutions with logo, branding choices are as important as the technical design.
3.1 Logo on slings, straps and ropes
On webbing slings, round sling sleeves and ratchet straps, KNKT can apply your logo directly to the webbing. The company chooses a method that matches the material and expected working conditions, so the mark stays visible and does not damage the webbing.
On mooring ropes, steel wire ropes, rigging hardware and material handling products, branding usually relies on tags, metal markings and paint colours instead of direct printing on the working surface.
3.2 Logo on labels and tags
Every custom lifting sling needs a clear label. This label shows the product type, WLL, safety factor, material, standard reference and basic safety notes. Within this label, KNKT can add your brand name, company details, website, QR code or barcode and internal product code.
The layout keeps safety and standard information easy to read. Branding sits around this core information, not on top of it.
3.3 Logo on packaging and documents
Packaging offers another strong branding surface. Poly bags or sleeves can carry your logo and simple data. Colour boxes and cartons can follow your own design style. Pallet labels can show your logo, product codes and barcodes for warehouse control.
Short user guides or instruction leaflets can also use your branding. KNKT can include them with custom lifting slings, ratchet straps or other products so end users receive clear instructions directly from “your” brand.
4. Step by Step Customisation Process
The process for ordering custom lifting slings and OEM products from KNKT follows several simple steps. This structure keeps the project clear for both sides.This simple process makes it easier to develop lifting and rigging solutions with logo step by step.
4.1 Customisation process overview
| Step | Description | Buyer actions |
|---|---|---|
| 1 | Initial enquiry and requirements | Send product list, specifications and target quantities |
| 2 | Technical evaluation and proposal | Review suggested designs and give feedback |
| 3 | Sample and artwork confirmation | Check samples, labels and logos; confirm or adjust |
| 4 | Mass production and quality control | Place the order and follow the production schedule |
| 5 | Packing, shipment and feedback | Receive goods and share feedback for future orders |
4.2 Step 1: Initial enquiry and requirements
First, you send an enquiry. You list the products you want, such as custom lifting slings, ratchet straps, mooring ropes, steel wire ropes, marine equipment or material handling items. For each product, you note WLL, dimensions, standards, quantities and target markets. You also describe your branding and packaging ideas.
4.3 Step 2: Technical evaluation and proposal
Next, KNKT reviews your request. The team checks whether the specifications are realistic and whether they fit the standards in your market. Then they suggest sling constructions, hardware combinations and logo positions. At this stage, you and KNKT refine the design until it meets both technical and commercial needs.
4.4 Step 3: Sample and artwork confirmation
After you accept the proposal, KNKT prepares samples of the custom lifting slings and any other key products. The samples carry your labels and logos. KNKT also performs internal load tests on representative slings. You review the samples, test them if needed and confirm the artwork. Once you approve in writing, everyone works from the same reference.
4.5 Step 4: Mass production and quality control
Then KNKT starts mass production. The quality team checks incoming webbing, rope, chain and hardware. They also monitor weaving, cutting, stitching, pressing and assembly. Finally, they check WLL marks, labels, logos and packaging. This sequence helps ensure that every batch of custom lifting slings matches the approved sample.
4.6 Step 5: Packing, shipment and feedback
When production finishes, KNKT packs and ships according to the agreed Incoterms and routes. After you receive the goods, you can share performance and market feedback. This information helps improve the next order and keeps your private-label range moving in the right direction.
5. Information Buyers Should Prepare
Good preparation saves time and avoids repeated emails. The checklist below shows the most important points for buyers who plan to order custom lifting slings and related products.
5.1 Buyer preparation checklist
| Area | Key points to define |
|---|---|
| Products | Select the groups you need: lifting sling, ratchet strap, mooring rope, steel wire rope, marine equipment, material handling, rigging hardware, elevator link or construction machinery accessories. |
| Technical specs | Decide WLL, safety factor, length, width or diameter, number of legs, end fittings and standards for each item. |
| Application | Describe the main industry and environment, such as construction, marine, logistics, warehouse, manufacturing or elevator work. |
| Branding | Prepare logo files, brand colours and preferred logo positions on slings, labels and packaging. |
| Documentation | Clarify which test reports, certificates, languages and special markings you need with the shipment. |
| Quantities | Estimate volume per size and per order, and note whether you expect repeat orders. |
When you send this information with your first enquiry, KNKT can create a much more accurate offer for your custom lifting slings and for the rest of your range.
6. MOQ, Lead Time and Cost Factors
6.1 Minimum order quantities
Minimum order quantity depends on product type, level of customisation and branding. Standard designs with only logo changes usually allow lower MOQs. Very special designs or complex packaging often require higher MOQs to stay economical. It therefore helps to share your planned volumes at the very beginning.
6.2 Lead time
Lead time has two parts. First comes the time needed for samples and artwork approval. Second comes the time for mass production and shipping. Sample time mainly depends on how quickly everyone confirms technical details and logos. Production time depends on material availability and order size. When you mention target delivery dates early, KNKT can plan capacity and choose suitable shipping options.
6.3 Main cost factors
The cost of custom lifting slings and OEM rigging products depends on several elements. Important drivers include material type and grade, dimensions and WLL, safety factor and design complexity, the logo process and number of colours, and the level of packaging and documentation. If you explain your target market level, such as economy, standard or premium, KNKT can suggest suitable configurations.
7. Safety, Standards and Quality Control
Customisation should not reduce safety or quality. This rule is especially important for custom lifting slings that hold heavy loads above people and equipment.
7.1 Design inside relevant standards
KNKT designs custom lifting slings and other lifting products within the limits of the standards used in your market. These standards set minimum breaking loads, safety factors, construction principles for webbing, round slings, chain slings and wire rope slings, and clear marking rules. Colour, logo and packaging may change, but the structural design remains inside these technical limits.
7.2 Quality management and testing
The quality system at KNKT includes checks on incoming materials, process control during weaving, cutting, stitching, pressing and assembly, and sampling plus load testing of finished slings and assemblies. For new or heavily customised designs, KNKT can produce extra test slings and confirm results before you place large orders.
7.3 Traceability and labels
Labels and batch markings on custom lifting slings show the product description, WLL, safety factor, material, standard reference, manufacturer and batch code. KNKT then adds your logo and contact details without removing these elements. This approach keeps each sling traceable and supports audits and investigations if they ever become necessary.
8. Why Work With KNKT for Custom Lifting Slings and Rigging Products
Working with one supplier for your lifting and rigging solutions with logo helps you standardise quality and brand image across all lifting sites.
8.1 One supplier for connected lifting and handling products
Because KNKT covers lifting sling, ratchet strap, mooring rope, steel wire rope, marine equipment, material handling products, rigging hardware, elevator link and construction machinery accessories, you can work with one partner for most lifting and securing needs. This approach simplifies sourcing, shipping and documentation and helps you build a coherent private-label range.
8.2 Manufacturing background and engineering support
KNKT participates directly in webbing and sling production. The company can therefore adjust sling designs for special projects, control quality from raw webbing to finished custom lifting slings and share practical advice on selection, use and inspection. This mix of factory control and engineering support is very useful when you want to grow a long-term lifting brand.
8.3 Experience with international markets
KNKT already exports to different regions, so the team understands that standards, expectations and packaging habits vary by market. They choose suitable norms, documents and packing methods for each destination. As a result, your custom lifting slings and rigging products reach new markets with fewer surprises.
9. How to Start Your Custom Project
Starting a project for custom lifting slings and OEM rigging products does not need to be complicated. You can move forward in three simple steps.
- Choose the first product categories, for example lifting sling, ratchet strap and mooring rope, and decide which sizes are most important for your market.
- Prepare basic specifications, estimated quantities and logo files, using the buyer checklist in this article as a guide.
- Send this information to KNKT through the company website, email or messaging tools and ask for a customised proposal.
If you are planning lifting and rigging solutions with logo for your market, start with a clear product list and logo artwork, then share them with KNKT for a customised proposal.
